Hydraulic Jack Repair

[cheech52]

I have a blown fuse on my right rear Leveling Jack. I contacted HWH and they figure it to be a shorted Solenoid. I have ordered a rebuilt solenoid but have no instructions on how to install it. Has anyone ever done this. Do you loose a lot of fluid. Do you have to open the small nut on the outside(some have wing nuts and some have 1/4" nuts) before you remove the old one and before installing the new one. Need some help.

Thanks

Cheech

[whodo]

For complete instructions with pictures in PDF go to http://www.hwhcorp.com/ once there scroll down the left side column and click on Customer/technical service then click on Tech Info then click on Service manuals then click on your particular series of levelers.
This will open a complete down-loadable/printable instruction manual.
I advice everyone to print a copy, it comes in so handy latter, for referring back to for information. Every thing you need to know concerning servicing/repairing as well as part #'s are listed.

[cheech52]

Thanks for the help.got the part and replaced it...wondering if this is a commom problem or should I be looking for something that would of caused it

Thanks

[whodo]

That is a question that I would ask HWH. They have a very dependable system.