PDA

View Full Version : popup won't go down


usmcnamvet
08-27-2007, 04:46 AM
I purchased a used 1994 Destiny popup by Fleetwood. I cranked it up using an electric drill. I noticed that one side is about an inch lower than the other. It won't crank up any higher, nor will it come back down. Any suggestions. Please send any comments to my e-mail address, usmcnamvet@aol.com. Thanks

travlnjo136
08-27-2007, 09:16 AM
Hi, Have you tried penetrating fluid sprayed on the crank anywhere?
Also, I had one that had those little button locks and sometimes they were darned hard to find.
good luck.
travlnjo136